Baldor FPM2516T 25//20HP, 3515//2920RPM, 3PH, 60//50HZ, 256T FLANGES (CSW)

Baldor FPM2516T 25//20HP, 3515//2920RPM, 3PH, 60//50HZ, 256T FLANGES (CSW)Specs Catalog Number FPM2516T Enclosure ODP Frame 256T Frame Material Steel Frequency 50. 00 Hz 60. 00 Hz Motor Letter Type Three Phase Output @ Frequency 20. 000 HP @ 50 HZ 25. 000 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 3600 RPM @ 60 HZ Voltage @ Frequency 460. 0 V @ 60 HZ 380. 0 V @ 50 HZ 230. 0 V @ 60 HZ 190. 0 V @ 50 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CSA CSA EEV CULUS Ambient Temperature 40 C

1 a Front Face Code Terminal Panel Front Shaft Indicator None Heater Indicator No Heater Insulation Class B Inverter Code Not Inverter KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Terminal Panel Or Lead Hole Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 5 @ 18 AWG Motor Type 3416L Mounting Arrangement F1 Number of Poles 2 Overall Length 11

69 IN Power Factor 81 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Pump Coupling Shaft Rodent Screen None Service Factor 1

2x(Code H) No load current 29

00 Hz Motor Letter Type Three Phase Phase 3 XP Class and Group None XP Division Not Applicable Agency Approvals CULUS WEEE Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Constant Torque Speed Range 6 Drip Cover No Drip Cover Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK Heater Indicator No Heater Inverter Code Inverter Duty IP Rating NONE Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3528B Mounting Arrangement F1 Number of Poles 4 Overall Length 13

Catalog Number CESSWDM3558T Enclosure TEFC Frame 143TC Frame Material Stainless Steel Frequency 60

5 No load current 10

lb Locked rotor torque 250 % Breakdown torque 280 % Locked rotor time 12s (cold) 7s (hot) Moment of inertia (J) 0

77 IN Power Factor 93 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code D-Flange Pulley Shaft Indicator Tapped & Key Rodent Screen None Service Factor 1

lb Locked rotor torque 240 % Breakdown torque 260 % Locked rotor time 18s (cold) 10s (hot) Moment of inertia (J) 0

1 RPM 1765 FRAME 254JP SF 1

Frame 90S/L Output 2

Frame 404/5TS Output 100 HP (75 kW) Number of Poles 2 Frequency 50 Hz Rated speed 2965 rpm Slip 1