Bando 10D128 Power King Combo, DM128 Square Flange Water Well Jet Pumps

Bando 10D128 Power King Combo, DM128 Square Flange Water Well Jet PumpsBando 10D128 To resolve problem applications where belts are flipping over or jumping out of the sheaves, utilize Bandos series of Combo belts. The tie band assures lateral rigidity and guides the belts into the sheave grooves. The tie band, reinforced with high strength transverse tensile cords, is fully oil and heat resistant and permanently welds the individual belts together. Combos utilize the premium quality Power King and Power Ace belts, with

8 a Front Face Code Resilient Mount Front Shaft Indicator None Heater Indicator No Heater Insulation Class B Inverter Code Not Inverter KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Terminal Panel Or Lead Hole Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 12 @ 18 AWG Motor Type 3413M Mounting Arrangement F1 Number of Poles 4 Overall Length 10

50 % Rated voltage 380 V Rated current 71

125 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1785 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None XP Temp Code T2D Drawings

75 VOLTS 230/460 AMP 2

1 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 12 AWG Motor Type 0944M Mounting Arrangement F1 Number of Poles 4 Overall Length 27

2(50%) Performance

8 No load current 108/62

9 POLES 2 NUMBER SPEEDS 1 RPM 3565 RPM 2 3565 HERTZ 60 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 FRME 365 SHAFT CODE TS MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CTI OPPOSITE END BEARING 6313-J/C3 SHAFT END BEARING 6313-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1

Standard NEMA MG-1 Frequency 60 Hz Voltage 575 V Number of poles 4 Degree of Protection IP23 Synchronous speed 1800 rpm Output rating 150 HP Mounting F-1 Flange C Terminal box¹ Left position Enclosure IC01 - ODP Electric Motors

34C51-5422 HP

50 % Rated voltage 190-220/380 V Rated current 3

35E2354G004G1 HP 1 VOLTS 230/460 AMP 3