Bando P48L100 SDS QD Timing Belt Pulley (SDS) Definite Purpose

Bando P48L100 SDS QD Timing Belt Pulley (SDS) Definite PurposeBando P48L100 SDS The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance

2 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 16 AWG Motor Type 3632M Mounting Arrangement F1 Number of Poles 4 Overall Length 15

29 IN Power Factor 89 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Tapped & Key Rodent Screen None Service Factor 1

Speed1550/1350 rpm

lb Locked rotor torque 280 % Breakdown torque 310 % Locked rotor time 63s (cold) 35s (hot) Moment of inertia (J) 76

Bando - TL1610 7/8 TL® bushings are preferred where mounting space is at a premium

2 POLES 4 NUMBER SPEEDS 1 RPM 1725 HERTZ 60 VOLTS PRIMARY 115 V VOLTS 115 FRME 48 STATOR DIAMETER 5

EFM2515T-8 SPEC

511 Line Amps 1

220 HP @ 60 HZ

DATA NU222 FRAME 445T POWER FACTOR 80 CHP HZ 60-90 Performance

5 ARM V 240 FLD V 150/300 ENCL TEFC P CODE D O

Load 35° C Start Configuration DOL Break-Down Torque 51