Bando TL60-S14M-60 STS TL Timing Belt Pulley (3525) TransportationBando TL60 S14M 60 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
07 LB-FT Pull-Up Torque 24
15 STARTCAPMFD N\A SHIPPING WEIGHT 140 BREAKDOWN TORQUE 315 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 242 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER H LOCKED ROTOR AMPS 64 NEMA NOMINAL EFFICIENCY 91
3 POLES 4 NUMBER SPEEDS 1 RPM 1725 HERTZ 60 VOLTS PRIMARY 115/230 V VOLTS 115 VOLTS 2 230 FRME 56 SHAFT CODE C STATOR DIAMETER 6
Degree of Protection IP56 Enclosure IC411 - TEFC Mounting B3T Rotation¹ Both (CW and CCW) Noise level² 51
Bando - 60-S2M-1094 Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like-sized drives having the standard high torque tooth profile
Load 82° C Start Configuration DOL Break-Down Torque 24
Bando - 10C85 To resolve problem applications where belts are flipping over or jumping out of the sheaves
Catalog Number ECP83768T-4 Enclosure TEFC Frame 215T Frame Material Iron Frequency 60
Catalog Number EBM3546-S Enclosure TEFC Frame 56 Frame Material Steel Frequency 60
Automotive engine accessory drives
625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1140 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
GE5KCP39GGS336S
