Fasco D0396 OEM Replacement Motor, 1/20 HP, 1 Ph, 60 Hz, 208-230 V, 1450 RPM, 1 Speed, 3.3" Diameter, OAO MOTOR BASES

Fasco D0396 OEM Replacement Motor, 1/20 HP, 1 Ph, 60 Hz, 208-230 V, 1450 RPM, 1 Speed, 3.3" Diameter, OAO MOTOR BASESOEM Direct Replacement Motor 3. 3" Diameter Shaded Pole Thermally Protected Open Air Over Class B Insulation, 40C Ambient Sleeve Bearing 5 16" Diameter Shaft with Flat 12. 25" Leads with Molded Plug Extended Studs Shaft End and Lead End, Belly Band Mount (Belly Band Not Included) Additional Information Thermal ProtectionThermally Protected Speed1450 rpm Current0. 90 1. 0 A Number of Speeds1 Ambient Temperature40 C ULRecognized Insulation ClassB CSAN

33 HP) Number of Poles 6 Frequency 60 Hz Rated speed 1100 rpm Slip 8

2 POLES 6 NUMBER SPEEDS 1 RPM 1175 RPM 2 1175 HERTZ 60 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 FRME 213 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE DI OPPOSITE END BEARING 6205-2Z-J/C3 SHAFT END BEARING 6208-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1

374 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1185 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding Normally Closed Thermostat XP Temp Code T3C Drawings

Model CFDB5-75-3730 Power 3

PK1149 13 1/2 X 14 X 4 3/4 CARTON *25 pc minbuy

15 STARTCAPMFD N\A SHIPPING WEIGHT 300 BREAKDOWN TORQUE 256 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 193 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER F LOCKED ROTOR AMPS 175 NEMA NOMINAL EFFICIENCY 92

75 kW (1 HP) Number of Poles 6 Frequency 50 Hz Rated speed 945 rpm Slip 5

Model_Number GM46 PRODUCT NAME 10 HP - TEFC-IP55 - 1770 PHASETYPE 3_PHASE MOTOR ENCLOSURE TEFC-IP55 HORSEPOWER 10 KILOWATTS 7

2 RPM 3450 FRAME 56YZ SER

66 IN Power Factor 87 Product Family Chem Process S/P 32-8 IEEE 841 Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1

3 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class H Inverter Code Inverter Ready IP Rating NONE KVA Code J Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 12 AWG Motor Type 3734M Mounting Arrangement F1 Number of Poles 4 Overall Length 16

625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 3525 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3 Drawings