Bando 100-S2M-90 S2M Timing Belt RPF5 (17mm wide)

Bando 100-S2M-90 S2M Timing Belt RPF5 (17mm wide)Bando 100 S2M 90 Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like sized drives having the standard high torque tooth profile. Smoother tooth engagement and direct contact of belt tooth top with the pulley grooves enables the belt to run quietly even at high speeds. As the tooth meshes with the pulley grooves, the cord lay forms an almost true circle, minimizing the cantilever effect on the cords,

6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code K Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 14 AWG Motor Type 3752M Mounting Arrangement F1 Number of Poles 4 Overall Length 22

Frame 254/6TC Output 20 HP (15 kW) Number of Poles 2 Frequency 50 Hz Rated speed 2895 rpm Slip 3

L3703 SPEC

9 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code G Lifting Lugs No Lifting Lugs Motor Lead Quantity/Wire Size 6 @ 6 AWG Motor Type A40064M Mounting Arrangement F1 Number of Poles 6 Overall Length 33

8x(Code J) No load current 225 A Rated torque 1470 ft

Nominal Outside Length (In)232

EL11206 SPEC

A44-7128-4239 HP 400 RPM 1785 DRIVE END BEARING 110BC02J30X OPP D

D XP Division Not Applicable Agency Approvals CCSA US Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Design Code B Drip Cover No Drip Cover Duty Rating CONT Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter IP Rating NONE KVA Code J Lifting Lugs Standard Lifting Lugs Motor Type M Mounting Arrangement V1 Number of Poles 4 Overall Length 28

180 Line Amps 7

Catalog Number EJMM4115T-G Enclosure TEFC Frame 326JM Frame Material Iron Frequency 60

Bando - 150-S5M-475 HP Anticipating the demand for energy savings and higher horsepower transmission