Deaf Bonce Apocalypse DB-SA2510 D1/D2 | 10" Subwoofer COIL CONFIGURATION:DUAL 2 OHM

Deaf Bonce Apocalypse DB-SA2510 D1/D2 | 10" Subwoofer COIL CONFIGURATION:DUAL 2 OHMProduct Description Manual DB SA2510 D1 D2 Specifications Model DB SA2510 D1 D2 Type Subwoofer Size 10 inch Voice coil size 2. 5 inch Cone Paper Magnet Ferrite Voice coil wire CCA Surround Foam RMS Power 1000 W MAX Power 2000 W Frame Alu Impedance 1+1 2+2 Ohm SPL 85,20 85,40 dB Fs 33,00 34,00 Hz Qts 0,56 0,58 BL 18,60 21,60 Vas 27,00 27,30 L Xmeh 28. 00 28. 00 mm Xmax 14,00 14,00 mm Mounting depth (151,2 mm) Cut out dimension (242,0 mm) Gross weight

3 ampere relay for controlling circuit

Numbers stamPed on the dies correspond to the cross sectional

00" �� 19

00 inch Cone Paper Magnet Ferrite Voice coil wire CCAW Surround Cloth RMS Power 175 W MAX Power 350 W Frame Steel Impedance 4 Ohm SPL 93

Voltmeter mode - the device simply reflects current voltage values

creating a true cold‑weld bond between the copper conductor and the lug

80% of the battery’s capacity is restored

Crimped on both ends

4 V) 2150 W Minimum permissible load on the channel 1 Ohm Low pass filter 35 - 250 Hz Crossover 24 dB/Oct Subsonic filter 10 - 50 Hz Input terminal 0 Ga Output terminal 8 Ga Working voltage 9 - 15 V Signal-to-noise ratio ≥ 85 dB Size (WxLxH) 28 x 9

Frequency Response: 1

2 inch (462

00" Port Length 17