PLM Engine Stand Cradle - Honda K-Series K20C Accord Civic Fuel LinesFITS: The following K20C, K20C1, K20C2, K20C3, K20C4 engines: 10th Gen Honda Civic Type R 10th Gen Honda Civic 2. 0T 10th Gen Honda Accord 2. 0T BEFORE ORDERING: This does not fit K20A K20Z K24A K24Z engines While you're building the engine, install it on the PLM engine stand, which makes it easy to install or remove of parts while you build your engine. It's easy to store, clean, swap, or transport. Designed with clearance so you can install a
you will need to modify your existing tensioner or add the RSX oil pump chain tensioner
5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)Maximum Differential Fuel Pressure – 7
our SPORTLINE springs provide the ultimate balance between high performance
Stock - as stated
(Three times the OEM rate
meaning fine tweaks can be made to shift throw
A packet of silicone grease is included with each kit to help lubricate the o-rings before installation into the shifter
37820-RX0-A01 through A22
you can also use the same shift boot collars (ACUiTY Part numbers 1924-K1
10th Gen Honda Civic EX 1
With the 6-pad
The RV6® Civic (Si) Front pipe was completely designed using Solidworks 3D modeling and our Romer CMM system for extremely precise measurements
