Adafruit I2C Controlled + Keypad Shield Kit for 16x2 LCD Driver

Adafruit I2C Controlled + Keypad Shield Kit for 16x2 LCD DriverThis new Adafruit shield makes it easy to use a 16x2 Character LCD. This shield lets you control a 16x2 Character LCD, up to 3 backlight pins AND 5 keypad pins using only the two I2C pins on the Arduino. The best part is you don't really lose those two pins either, since you can stick i2c based sensors, RTCs, etc and have them share the I2C bus. This is a super slick way to add a display without all the wiring hassle. The shield is designed for

So basically when you use FSRs you should only expect to get ranges of response

4 x rubber feet included

You'll need a power supply to power it

For that reason

0V so that there's a little bit of 'headroom' for long cables

This handy item takes the coaxial digital or Toslink optical S/PDIF from your TV and gives you standard L/R RCA for your stereo

You could slide the BitScope in your pocket and debug on the go or in the field with all the input/outs you need

Since the motors are analog servos

These 4x4 button pad boards are fully tile-able and communicate over I2C

Four mounting holes make for a secure connection

but is easily adjustable from 100mA up to 1000mA by soldering a through-hole resistor on-board

which has a 100mA default rate