Bando 310XL050G XL Timing Belt W40Bando 310XL050G The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt, and moisture. Continuous, helically wound high strength fiberglass tensile cords guarantee dimensional stability to eliminate take up adjustments. Heavy torque loads wont fatigue this super strong cord.
34J153W415 HP
5 FULL LOAD AMPS PRIMARY 13
2 FULL LOAD AMPS PRIMARY 9-8
6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code N Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3520M Mounting Arrangement F3 Number of Poles 4 Overall Length 12
2 a Front Shaft Indicator None Heater Indicator No Heater Insulation Class H Inverter Code Inverter Duty KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 14 AWG Motor Type 0748M Mounting Arrangement F1 Number of Poles 4 Overall Length 20
have mechanically linked contacts (IEC / EN 60947-5-1) and mirror contacts (IEC / EN 60947-4-1) that provide adequate operation of the safety circuits of machinery and equipment that need to operate in compliance with international safety standards
500 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 3600 RPM @ 50 HZ Voltage @ Frequency 460
32 LB-FT Locked-Rotor Torque 12
Standard NEMA MG-1 Frequency 60 Hz Voltage 460 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 3 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC411 - TEFC
Output HP1/20-1/15 Hp
0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready IP Rating NONE KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 6 AWG Motor Type 4248M Mounting Arrangement F1 Number of Poles 2 Overall Length 29
Model_Number GA79 PRODUCT NAME 10 HP - TEFC - 1185 PHASETYPE 3_PHASE MOTOR ENCLOSURE TEFC HORSEPOWER 10 KILOWATTS 7
