Fasco D504 Fan and Blower Motor, 1/8 HP, 1 Ph, 60 Hz, 115/230 V, 1550 RPM, 1 Speed, 3.3" Diameter, OAO RESILIENT BASE

Fasco D504 Fan and Blower Motor, 1/8 HP, 1 Ph, 60 Hz, 115/230 V, 1550 RPM, 1 Speed, 3.3" Diameter, OAO RESILIENT BASEGeneral Purpose Motor 3. 3" Diameter Permanent Split Capacitor (PSC); Capacitor Required: 10 Mfd 370 Volts (Not Supplied with Motor) Thermally Protected Open Fan Cooled Class B Insulation, 40C Ambient Sleeve Bearing 5 16" Diameter Shaft with Flat 20" Leads Extended Studs Shaft End Additional Information Thermal ProtectionThermally Protected Speed1550 rpm Current1. 60 . 080 A Number of Speeds1 Ambient Temperature40 C ULRecognized Insulation ClassB CSAY

33 % Rated voltage 208-230/460 V Rated current 54

Model_Number CR80 PRODUCT NAME 30 HP - DP - 1780 PHASETYPE 3_PHASE MOTOR ENCLOSURE DP HORSEPOWER 30 KILOWATTS 22

875 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1760 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding Normally Closed Thermostat Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3C Drawings

Frame 200M/L Output 30 kW (40 HP) Number of Poles 4 Frequency 50 Hz Rated speed 1475 rpm Slip 1

7 a Front Face Code Resilient Mount Front Shaft Indicator None Heater Indicator No Heater Insulation Class B Inverter Code Not Inverter KVA Code E Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Terminal Panel Or Lead Hole Motor Lead Termination None Motor Lead Quantity/Wire Size 7 @ 18 AWG Motor Type 3414C Mounting Arrangement F1 Number of Poles 4 Overall Length 11

15 SHIPPING WEIGHT 26 BREAKDOWN TORQUE 72

Standard NEMA MG-1 Frequency 60//50 Hz Voltage 230/460//380 V Number of poles 2 Degree of Protection IP55 Synchronous speed 3600 rpm Output rating 30 HP Mounting W-6 Flange P Terminal box¹ Left position Enclosure IC411 - TEFC

Load 93° C Start Configuration DOL Break-Down Torque 95

6 a Front Face Code Terminal Panel Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code M Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Terminal Panel Motor Lead Termination None Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3528M Mounting Arrangement F1 Number of Poles 8 Overall Length 12

8 a Front Face Code Terminal Panel Front Shaft Indicator None Heater Indicator No Heater Insulation Class B Inverter Code Not Inverter KVA Code - Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Terminal Panel Or Lead Hole Motor Lead Termination None Motor Lead Quantity/Wire Size 5 @ 18 AWG Motor Type 3411C Mounting Arrangement F1 Number of Poles 6 Overall Length 10

Amperes 253-229/115 A LRC 6

1 kW) Number of Poles 2 Frequency 60 Hz Rated speed 3520 rpm Slip 2