WEG SSW7000C125T411N2 MV PANEL SSW7000C125T411N2 IEEE 841The soft starters SSW7000 operates on the acceleration deceleration and on the protection of medium voltage three phase induction motors. This Soft Starter is available on 2,3 kV up to 13,8 kV voltage range, attending applications that requires 300 HP up to 16300 HP power range. Developed to ensure excellent performance, the SSW7000 application minimize the current surges on the motor starting, prevents mechanical shocks on the load and on the motor,
UL approval UL1077 Trip curve D Number of poles 1 pole Rated current 8 A Maximum voltage 277 VAC Type Thermal-magnetic Downloads
5 kW) Number of Poles 4 Frequency 50 Hz Rated speed 1430 rpm Slip 4
5 SERVICE FACTOR AMPS PRIMARY 0-23
92 A Rated torque 40
0 Mounting type Panel mounting Accessories Not contain Handle color Black and gray Accessory material Plastic Rated insulation voltage Up to 1000 V Accessory reference H
Frame Material Cast Iron Impregnation Method Dip and Bake Polyester Main terminal box hole NPT 1" Terminal Block Without Shaft Locking Device Without Shaft Material SAE 1040/45 Carbon Steel Painting RAL 5009 202P (ISO 12944 - C4) Grounding Lugs Single Fan Cover material Steel Tropicalized Painting Without Fan material Plastic Bearing cap Yes- Bearing Cap Bolt Material Carbon Steel Winding thermal protection Thermostat - 2 wires 1 per phase 155°C Balancing Method 1/2 Key Drip Cover With Overload protector (phenolic) Without overload protector Connection Cables Quantity 9 Downloads
9 POLES 4 NUMBER SPEEDS 1 RPM 1775 HERTZ 60 VOLTS PRIMARY 575 VOLTS 575 FRME 256 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE DE OPPOSITE END BEARING 6309-2Z-J/C3 SHAFT END BEARING 6309-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1
Standard NEMA MG-1 Frequency 60 Hz Voltage 208-230 V Number of poles 2 Degree of Protection IP21 Synchronous speed 3600 rpm Output rating 7
Rated current 25 A Reference CWB Main contact 3 NO Control voltage 48V 50/60Hz Terminal type Screw Attributes
lb Locked rotor torque 240 % Breakdown torque 300 % Locked rotor time 21s (cold) 12s (hot) Moment of inertia (J) 0
Amperes 559 A LRC 5
0 SP 6885 BHP @ 0
