Skutt Feeder Wire Set – KM1222-3, KM1022, KM1022-3, KM822, KM822-3 Glaze Line_Mayco (EL) Elements

Skutt Feeder Wire Set – KM1222-3, KM1022, KM1022-3, KM822, KM822-3 Glaze Line_Mayco (EL) ElementsKPS Part Numbers 1000568 Skutt Part Numbers 3626 Feeder wires are used to connect the element pigtails to the terminal strip. A new feeder wire set includes crimp on barrel connectors, wires, blue female tabs and labels for each wire that correspond to the terminal strip. Wires are also pre stripped so all you need to do is crimp on the barrell connectors and attached them to your elements. If the white insulation on my feeder wires has turned brown

Mixed TP Label

Run a thick slab through the slab roller using canvas on the bottom to absorb moisture and SlabMat on the top

NOTE: Vents made by manufacturers other than L&L may not be listed to UL499 standards if used with an L&L kiln

(The LM cups were created by artist Justin Rothshank

Before first using the product you will need to punch a hole in the tip of the plastic screw cap using the writer tip provided

Make perfect reproductions of 3-dimensional shapes in minutes with this ingenious water-activated

Bright Yellow

Makes 14 oz

60 Amp breaker required

25” H x 3

you can explore endless color possibilities

Always test to find the best body/glaze combination that gives you ideal results before engaging in mass production