Riviera - Mirror 19-1-gear-ratio

Riviera - Mirror 19-1-gear-ratioThis pickguard will only fit genuine '62 '70 Kalamazoo made Epiphone Riviera. It will not fit the modern reissue Riviera models. This pickguard is made from silver mirror a clear acrylic material measuring . 118" 2. 99mm thick with a 45 degree bevelled edge. The silver reflective layer is attached to the underside of the acrylic, preventing it from getting scratched or dented once it is fitted to the instrument. <

Gibson SG Special

For ES-125T please see our EST-7600 series guards Light brown tortoiseshell (with a hint more red to the overall colour compared to the dark brown tortoiseshell that we sell) celluloid top layer with a PVC White / Black / White laminate underneath

Many lever switches use the commons as outputs for the switch but with this switch this is not necessarily going to be the case

Comes complete with mounting posts and body inserts

though the marks are quite subtle and difficult to capture accurately on camera

30mm width

Please check that the Humbucker you intend to put the cover onto has the same pole piece dimensions

Solid steel replacement saddles

Peg Hole Requirement= 25/64 in

This is best described as being just a tinted silvery-gold finish rather than a strong yellow gold colour that is normally found on most gold-plated guitar hardware

one is for an original 1960's instrument and the other is for the current Gibson USA Memphis '63 Reissue

This bone blank guitar saddle does not offer any intonation compensation