Imperial Hexagonal Bolt Partial Thread Zinc Plated 1-1/4-7 * 4" Grade 5 cadium_plated

Imperial Hexagonal Bolt Partial Thread Zinc Plated 1-1/4-7 * 4" Grade 5 cadium_platedThis hexagonal bolt has a length of 4 with a threading of 1 1 4 7 [Partially Threaded]. It is made of zinc plated and thus provide medium resistance to corrosion in both dry and wet environments. The Grade 5 increases its strength against the pressure and has a tensile strength and hardness of 120,000 psi Rockwell C25. Furthermore, it features a shear strength of 72,000 psi. UNC Coarse threads are an industry standard. These bolts are classified as

This plow bolt has a length of 4-1/2" with a threading of 1-8 [Partially Threaded]

It is made of zinc plated and thus provide medium resistance to corrosion in both dry and wet environments

The 316 Stainless Steel increases its strength against the pressure and has a tensile strength and hardness of 75

5 | SAE J429 and comply with dimensional standards

provides high resistance to corrosion in dry and wet environments

This hexagonal bolt has a length of 7 with a threading of 1-8 [Partially Threaded]

This hexagonal bolt has a length of 6-1/2 with a threading of 7/8-9 [Partially Threaded]

This hexagonal bolt has a length of 7-1/2 with a threading of 1-1/8-7 [Partially Threaded]

It is made of plain alloy steel and thus provides low resistance to corrosion in dry and wet environments

These nuts are reusable

This hexagonal bolt has a length of 8 with a threading of 1-8 [Partially Threaded]

An irregularlyshaped thread at the top of the nut grips the bolt for a stronger hold than nylon-insert locknuts