Bando 150J30 Rib Ace DS3MBando 150J30 Rib Ace is an ultra thin, extremely flexible belt with the versatility to handle heavy, high speed industrial applications like machine tools, as well as light duty, slower applications such as exercise equipment. Able to utilize very small sheaves, allowing for speed ratios up to 4 to 1. Smooth, vibration free performance ideally suited for consumer goods applications like clothes dryers. Rib Ace belts can be used in serpentine drive
Amperes 485 A LRC 7
lb Locked rotor torque 229 % Breakdown torque 250 % Locked rotor time 16s (cold) 9s (hot) Moment of inertia (J) 0
37N046L864G1 HP 7
Amperes 185-173/86
33 HP) Number of Poles 6 Frequency 50 Hz Rated speed 890 rpm Slip 11
625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 3475 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 Automatic Thermal Overload Winding Thermal 1 Location SB Winding Thermal 2 None Drawings
1 POLES 4 NUMBER SPEEDS 1 RPM 1725 HERTZ 60 VOLTS PRIMARY 115/208-230 VOLTS 115 VOLTS 2 208 VOLTS 3 230 FRME 56 SHAFT CODE HC STATOR DIAMETER 6
000 HP Agency Approvals CCSA US Ambient Temperature 40 °C Armature Current 123
Power supply 200-240 V Input phases Three-phase Configuration With options Rated current (ND) 88 A Rated current (HD) 75 A RFI filter Without filter Enclosure IP20 Dynamic braking Standard with braking Safety Stop Prepared to install the accessory CFW500-SFY2 Electronic supply Not Available Attributes
Load 94° C Start Configuration DOL Break-Down Torque 59
654 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1770 rpm Speed Code Single Speed Motor Standards IEC Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
Standard NEMA MG-1 Frequency 60//50 Hz Voltage 230/460//380 V Number of poles 2 Degree of Protection IP55 Synchronous speed 3600 rpm Output rating 3 HP Mounting W-6 Flange P Terminal box¹ Left position Enclosure IC411 - TEFC
