Bando P38-14M-55 HT QD Timing Belt Pulley (SF) Condenser FansBando P38 14M 55 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
50 % Rated voltage 240/415 V Rated current 3
02 HP - TEFC-IP55 - 965 PHASETYPE 3_PHASE MOTOR ENCLOSURE TEFC-IP55 HORSEPOWER 4
Bando - 840L4 Rib Ace® is an ultra-thin
5 FULL LOAD AMPS PRIMARY 5 SERVICE FACTOR AMPS PRIMARY 6
4 LB-FT Locked-Rotor Torque 16 LB-FT Starting Current 49 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code F Lifting Lugs Vertical Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 6 AWG Motor Type 4260M Mounting Arrangement F1 Number of Poles 2 Overall Length 33
6x(Code H) No load current 12
Terminal type Screw Connector cross-section 4 mm2 Nominal current Not applicable Lugs color Green/Yellow Rated voltage Not applicable Quantity per packaging 50 Attributes
04 IN Power Factor 64 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1
50 % Rated voltage 415 V Rated current 53
Bando - 150-S8M-1184 C-X
37A021L865G2 HP 10 VOLTS 230/460 AMP 25/12
