9'0" Jive Glider Zone (Used) Surf

9'0" Jive Glider Zone (Used) SurfJacob Ells is a Santa Barbara based shaper who is always looking to push the boundaries of alternative boards. His Glider Zone model was made to trim with a very pulled in nose and heavily foiled rails. The bottom contour starts with a slight roll in the nose and transitions into a double barrel concave out the tail. Take this mini glider out and enjoy being in the glider zone. Looking to test out one of Jacob's gliders? We have this one available for

5'5" x 20 1/4" x 2 3/8"

7'1" x 22 3/8" x 3"

The deck is kept fairly flat until several inches from the rail at which point the rail is foiled in a beveled manner to make the tick rail more forgiving

The bottom contour starts with a rolled entry at the nose then transitions into a tri-plane hull with a deep double barrel concave through the center of the tri-plane and out the tail

5'8" x 19 1/2" x 2 3/8" 29L

With an outline similar to a pin tail version of Gato Heroi's infamous Death Dagger

his talents extend much further out into the realms of music and art

5'8" x 20 1/2" x 2 3/4"

You can catch Lingenfelter any given day at San Onofre

Griffin Stepanek is a La Jolla born

and keep your sun-kissed skin replenished and glowing

rather letting the rolled bottom to slight "v" really drive you down the line