Bando 2-7MS900 Banflex Combo MOTOR STARTERS AND PROTECTIONBando 2 7MS900 Ideally suited for short center distances and small diameter pulleys, BanFlex Combos banded construction minimizes or eliminates the turnover problem normally associated with small cross section belts. The ribbed construction provides superior flexibility while maintaining lateral stability. Precision molded, seamless polyurethane ribs provide maximum resistance to oil and traditional lubricants with virtually vibration free operation.
Front type Lever Actuation form Fixed Selector switches posittions 2 Selector switches angle 90 ° Front color Standard Actuation signaling Not contain Front coating Uncoated Specific function Without lettering Installation diameter 22 mm Degree of protection IP66 Weight 0
38 IN Power Factor 85 Product Family Chemical Processing (Not DC) Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1
VFSWDM3537-E SPEC
Terminal type Screw Connector cross-section 10 mm2 Nominal current 57 A Lugs color Gray Rated voltage 630 V Quantity per packaging 50 Attributes
52 LOCKED ROTOR TORQUE UOM OZFT INSULATION CLASS F KVA CODE LETTER M LOCKED ROTOR AMPS 47
Start Type Direct Three-phase Maximum Power Rating Not applicable Rated operational voltage Ue<=600V Control voltage 600V50/60Hz Control devices E-Reset Degree of protection TYPE1 Starters Complements Does Not Contain Rated current (AC-3) 9A (CWB9) Overload relay 0
Standard NEMA MG-1 Frequency 60 Hz Voltage 575 V Number of poles 8 Degree of Protection IP55 Synchronous speed 900 rpm Output rating 1
Standard NEMA MG-1 Frequency 60 Hz Voltage 230/460 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 75 HP Mounting W-6 Flange P Terminal box¹ Left position Enclosure IC411 - TEFC
24 IN Power Factor 91 Product Family General Purpose Pulley Face Code C-Face Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1
8 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready IP Rating NONE KVA Code F Lifting Lugs Standard Lifting Lugs Max Speed 4200 rpm Motor Lead Quantity/Wire Size 3 @ 2 AWG Motor Type A36068M Mounting Arrangement F1 Number of Poles 2 Overall Length 31
Bando - 246-3M-9 Synchro-Link® HT (High Torque Synchronous) belts' curvilinear tooth design improves stress distribution to provide high horsepower ratings over a wide speed range and high torque transmission at low speeds
35K695P801G1 HP 1
