Epiphone Les Paul Standard - Mirror Johnny Marr Jaguar

Epiphone Les Paul Standard - Mirror Johnny Marr JaguarThis template was taken from a 2009 Epiphone Les Paul Standard made in China. We have not had the opportunity to compare to earlier made in Korea production Epiphone Les Paul models to see if tooling is the same and therefore cannot guarantee a successful fit on any other model. This pickguard is NOT made for USA Gibson manufactured Les Paul guitar. Epiphone typically uses a different dimension mounting ring for their pickups from Gibson which affects

with a 45 degree bevelled edge

7mm one side down to 3

Choose "Mexican-made reissue" for the Made In Mexico '69 Telecaster Thinline Reissue

Length of mounting plate from hinge pin ctr = 2 17/64 inches (57mm)

5K (DeArmond) by following the included diagram

Mounting holes are 4mm in diameter

Thread = 5/16 24 US Thread

As standard this pickguard comes with 11 outer mounting holes

Post height = 1 in

Gibson Les Paul Jr

Each string post has two holes - allowing for the tuners to be mounted either through the back of the headstock or through the side

Widest string spacing 55mm (centre to centre of the two outer E strings)